Nova SI 400EP Clearance
Nova SI 400EP Clearance
Nova SI 400EP Clearance
Nova SI 400EP Clearance
Nova SI 400EP Clearance
Nova SI 400EP Clearance
Nova SI 400EP Clearance
Nova SI 400EP Clearance

Nova SI 400EP Clearance

Regular price
Sale price
Unit price
Total Savings 30%
Monthly payments as low as $501


This specific clearance listing machine serial number has been sold.

Contact SCM for the availability of this machine model, at which time we can provide you with the current inventory status of the same model, same model machines on order/transport as well as your local distributor's contact information.*

Call (770) 622-6637 to verify the status, condition and estimated delivery of the machine prior to purchase. 

The Nova SI 400EP is a versatile sliding table saw with a 16” blade capacity that can be used for breaking down large panels as well as cutting smaller components. This machine has an incredible stroke of 10.5ft (126"). The programmable overhead Ready 3 Axis controller regulates the blade height, tilt and rip fence positioning with maximum accuracy. Both large and small shops can benefit from this versatile performer.

Programmable Rip Fence and Main Blade Movement
The Nova SI 400EP uses the “Ready 3 UP” three axes programmer. This controls the programmable rip fence, raising and lowering of the main blade and the tilt angle. It also has the following features:
- 3-axis electronic control for saw blade lifting and tilting, and powered rip fence, selectable by means of numerical keyboard and displayed on electronic digital readouts
- Memory capacity up to 99 working programs
- Fence position changes automatically when inputting the blade width
- Automatic blade height and rip fence compensation in relation to the blade angle
- 3 Modes of operation: Jog (push-button control), Semi-Automatic (individual input of specific axis position), and Automatic (preprogrammed)
- Digital readouts for all axis positions
- Hour of operation meter
- Inch or Metric operation
- Calculator

Standard Equipment

- Anodized aluminum alloy carriage sliding on hardened steel guides
- Separate Mitre Fence for Angle Cutting
- Three blade speeds
- “Ready 3 UP” Programmer - positioning of Main Blade (height, lower, tilt) and rip fence positioning
- Individual main and scoring motors
- Overarm blade guard with integrated dust outlet
- Squaring frame complete with mobile aluminium bar for quick setup for angular cuts
- Overhead control panel
- Programming capacity up to 99 working programs
- Scoring unit with external setup and stops for a quick re-positioning of the blade
- “EZ Dial” Adjustment for the split scoring blade
- Eccentric clamp for panel hold-down
- Overload switch protection
- Auxiliary low voltage circuit (110 voltage)
- Direct start main motor
- Automatic Self-Braking Motor
- We provide a complimentary 14” (350mm) blade with the machine. Max blade capability is 16” (400mm)

Technical Specifications

Main motor horsepower

15 Hp

Scoring motor horsepower

1 Hp

Fixed table size

41” x 25”

Sliding table width


Height of worktable


Rip capacity

1270mm (51”)

Max. length of crosscut with scoring

3200mm (126”)

Main blade diameter/arbor

400mm / 1”

Scoring blade diameter/ arbor

120mm / 3/4"

Arbor speeds – main x 3/scoring

3,000 / 4,000 / 5000 / 8,500 RPM

Dust outlets – main/overarm guard

120mm / 100mm (5”/4”)

Depth of cut – 0 degrees/45 degrees

140mm / 97mm (5.5”/3.8”)

Overall dimensions

279.5” x 157.5” x 44”

Crated dimensions - 2 pieces (machine/table)

7.4’ x 4.6’ x 6.9”

12.1’ x 1.5’ x 0.7’

Shipping weight  - 2 pieces (machine/table)

2,340 lbs. / 340 lbs.

1062 kg / 153 kg 

Net weight

2,400 lbs. 1040 kg

Electrical requirements

3-Phase, 230 volts

Dust extraction

1100 cfm

*All machinery listed on the clearance section is sold "As Is". There are no implied warranties or guarantees with any demo, showroom, scratch-and-dent, used, or aged machinery. It is the responsibility of the buyer to crosscheck with the manufacturer regarding descriptions and specifications listed per machine.

**This machine ships in multiple packages and requires the customer to contact SCM in order to properly calculate shipping estimates. Arranging your own freight pickup is another available option on all orders.**