
Serial Number: MA00019140*
Call (770) 622-6637 to verify the status, condition and estimated delivery of the machine prior to purchase.
For a wide range of products such as floor, decking, doors or furniture elements, manufacturers are seeking to emphasize the natural grain of the wood in order to obtain an antique or textured finish. The STR 62R’s brush filaments abrade the softer wood fiber more than the harder ones, revealing the grain of the wood and leaving a surface in relief that can then be stained or filled for ceruse or vast array of unique finishes. With a working width of 600mm, variable feed speed and a working height of up to 300mm the STR 62R is the machine for you.
- High resistance rubber belt
- Steel brush (0.2mm wire)
- Tynex brush (60 grit)
- Fixed speed brush motors
- Manual lifting of operating units by means of front handwheels
- Use and maintenance manual
Technical Specifications
Working units |
2 |
Working width |
600mm |
Max working height |
300mm |
Brush motors |
3-phase, 230v |
Horsepower |
5.5 Hp each |
Feed belt motor |
0.5 Hp |
Dust extraction hoods |
2 x 150mm |
Brush speed |
1500 rpm |
Feed speed |
3 – 20 m/min |
Brush diameter |
190 / 190mm |
Net weight |
1653 lbs. |
Dimensions (L x W x H) |
1300 x 900 x 1300mm |
*All machinery listed on the clearance section is sold "As Is". There are no implied warranties or guarantees with any demo, showroom, scratch-and-dent, used, or aged machinery. It is the responsibility of the buyer to crosscheck with the manufacturer regarding descriptions and specifications listed per machine.
- choosing a selection results in a full page refresh
- press the space key then arrow keys to make a selection